vaultwarden and postgresql

wireguard.nix

@@ -1,39 +0,0 @@
-{
-  # Enable WireGuard
-  networking.wireguard.enable = true;
-  networking.wireguard.interfaces = {
-    # "wg0" is the network interface name. You can name the interface arbitrarily.
-    tr = {
-      # Determines the IP address and subnet of the client's end of the tunnel interface.
-      ips = [ "10.0.1.2/24" ];
-      #listenPort = 51821; # to match firewall allowedUDPPorts (without this wg uses random port numbers)
-
-      # Path to the private key file.
-      #
-      # Note: The private key can also be included inline via the privateKey option,
-      # but this makes the private key world-readable; thus, using privateKeyFile is
-      # recommended.
-      privateKeyFile = "/root/wireguard-keys/private";
-
-      peers = [
-        # For a client configuration, one peer entry for the server will suffice.
-
-        {
-          # Public key of the server (not a file path).
-          publicKey = "TSPq7sJbY9DNhCu76sc0s9wtFnfHhk/ud0D/JiEPfV4=";
-
-          # Forward all the traffic via VPN.
-          allowedIPs = [ "10.0.1.1" ];
-          # Or forward only particular subnets
-          #allowedIPs = [ "10.100.0.1" "91.108.12.0/22" ];
-
-          # Set this to the server IP and port.
-          endpoint = "79.72.30.126:51821"; # ToDo: route to endpoint not automatically configured https://wiki.archlinux.org/index.php/WireGuard#Loop_routing https://discourse.nixos.org/t/solved-minimal-firewall-setup-for-wireguard-client/7577
-
-          # Send keepalives every 25 seconds. Important to keep NAT tables alive.
-          persistentKeepalive = 25;
-        }
-      ];
-    };
-  };
-}